Rabbit Run 2m x 6m (6ft x 20ft)
6 feet wide but 20 feet long. Ideal for narrow gardens. Our 12 square meter rabbit run is a first rate enclosure constructed to last many years and give you peace of mind with regards to the welfare of your rabbits, and indeed, any other pets.
£609.98
Description
This high-quality metal run helps ensure that your rabbits or other pets won’t be faced with any intruding predators, and they can’t wander off. The wire mesh exterior is woven for rabbits and small animals, and the ground skirt deters any animals from digging under the perimeter.
- Span 2m (across door) – approx 6ft
- Depth – 6m – approx 20ft
- Leg Height 1.6m
- Height to peak – 2.1m
- Fully galvanised 38mm tubular steel framework
- Tanalised timber door and frame
- Door 1.8m high x 75cm wide
- Galvanised hinges and bolt
- Strong 20gauge hexagonal wire mesh – 1 inch holes or select an upgrade option above
- Mesh ground skirt all round
- Anchor pegs supplied
- PVC part-covers available in ”Options/Extras”
- Optional welded mesh ground cover (19g, half inch hole)
This self assembly rabbit run is made with 38mm galvanised steel tubular frame and tanalised timber door and door frame with a safety lock to stop even smart animals from escaping. We use the highest quality materials to make sure this is a long lasting and durable enclosure.
The standard one-inch 20 gauge hex mesh can be upgraded to one-inch hole, 19g (stronger) welded, or half-inch hole 19g welded mesh plus an optional ground covering of our ultimate half inch hole mesh. An optional low maintenance PVC partial covering can also be used in times of bad weather or to provide shade in summer.
ASSEMBLING YOUR RABBIT RUN
All of our rabbit runs come with full, very detailed assembly instructions. You may want some help from a friend but if you follow the step by step guide that comes with your run, getting your rabbit’s new play area assembled is easy. You can always contact us on our Freephone number 0800 832 1962, if you have any issues or questions regarding the installation of your new rabbit run. The tools you’ll require to assemble your rabbit pen are as follows: Cross head screwdrivers, Measuring tape, Wire cutters, Step ladder & Hammer
If you decide to increase the size of your run, either because you want to extend the room available to your rabbit or other pets, or you want to house more rabbits or pets, you can extend later by adding a single or multiple, extra 2 metre section. Simply call us to discuss your options.
A VARIETY OF USES
There are so many different uses for our rabbit runs, it’s impossible to list them all. The most common use is to provide a safe home for pets and poultry but the range of uses is as diverse as your imagination. People are using our pens to house cats or dog run, as an aviary and even to protect fruit trees.
GROUND PREPARATION
Our runs will sit on any surface providing it is relatively flat (up to a 1in20 slope should be fine) but different surfaces have different advantages/disadvantages.
A grass or earth surface is probably best for rabbits. It allows the ground skirt to be pegged down but there is a possibility of rats tunneling under the frame to get inside. But we do have an optional full ground cover made from our ultimate welded mesh with half inch holes to help prevent this (select this option when adding this product to your Cart).
The runs will also sit well on a hard/concrete/tarmac surface which eliminates the worry about tunneling but won’t allow the ground skirt to be pegged down.
CHOOSING THE RIGHT SIZE
When you’re deciding which size run will house the number of rabbits you have, please consider overcrowding & room for you to maintain the enclosure. You should also allow for the space taken up by your hutch, etc., if these are going to be kept inside the run.
Reviews
There are no reviews yet.