Dog Run 2m x 2m (6ft x 6ft)
Our smallest size but the same high spec as our full range. At 6ft x 6ft our entry level walk in dog run is designed to keep your animals safe and comfortable whilst remaining small enough to fit into those smaller areas with limited space.
£343.98
Description
Our Mini walk in dog run is designed to keep your dog safe and comfortable whilst remaining small enough to fit into areas with limited space. The four square metre inside area – approximately 36 square feet – allows dogs to freely access fresh air whilst keeping them from roaming astray, and providing extra protection against predators.
- Span 2m (across door) approx 6ft
- Depth – 2m – approx 6ft
- Leg Height – 1.6m
- Height to peak – 2.1m
- Fully galvanised 38mm tubular steel framework
- Tanalised timber door and frame
- Door 1.8m high x 75cm wide
- Galvanised hinges and bolt
- Strong 20gauge hexagonal wire mesh – 1 inch holes or select a mesh option above
- Optional ground cover, 19g welded mesh with half inch hole.
- Mesh ground skirt all round
- Anchor pegs supplied
- PVC part-covers available in ”Options/Extras”
The standard one-inch 20 gauge hex mesh can be upgraded to one-inch hole, 19g (stronger) welded, or half-inch hole 19g welded mesh plus an optional ground covering of our ultimate half inch hole mesh. An optional low maintenance PVC partial covering can also be used in times of bad weather or to provide shade in summer.
This self assembly dog run is made with 38mm galvanised steel tubular frame and tanalised timber door and door frame with a safety lock to stop even smart dogs from escaping. We use the highest quality materials to make sure this is a long lasting and durable enclosure.
ASSEMBLING YOUR DOG RUN
All of our dog runs come with full, very detailed assembly instructions. You may want some help from a friend but if you follow the step by step guide that comes with your run, getting your dog’s new play area assembled is easy. You can always contact us on our Freephone number 0800 832 1962, if you have any issues or questions regarding the installation of your new dog run. The tools you’ll require to assemble your dog pen are as follows: Cross head screwdrivers, Measuring tape, Wire cutters, Step ladder & Hammer
If you decide to increase the size of your run, either because you want to extend the room available to your dog or other pets, or you want to house more dogs or pets, you can extend later by adding a single or multiple, extra 2 metre section. Simply call us to discuss your options.
A VARIETY OF USES
There are so many different uses for our dog runs, it’s impossible to list them all. The most common use is to provide a safe home for pets and poultry but the range of uses is as diverse as your imagination. People are using our pens to house rabbits, as a cat or dog run, as an aviary and even to protect fruit trees.
GROUND PREPARATION
Our runs will sit on any surface providing it is relatively flat (up to a 1in20 slope should be fine) but different surfaces have different advantages/disadvantages.
A grass or earth surface is probably best for dogs. It allows the ground skirt to be pegged down but there is a possibility of rats tunneling under the frame to get inside. But we do have an optional full ground cover made from our ultimate welded mesh with half inch holes to help prevent this (select this option when adding this product to your Cart).
The runs will also sit well on a hard/concrete/tarmac surface which eliminates the worry about tunneling but won’t allow the ground skirt to be pegged down.
CHOOSING THE RIGHT SIZE
When you’re deciding which size run will house the number of dogs you have, please consider the size of your dog/s. You should also allow for the space taken up by your kennel, if the kennel is going to be kept inside the run.
Reviews
There are no reviews yet.